I Tested the Delta 10 Inch Tablesaw Zero Clearance Insert – Here’s Why It’s a Must-Have for Any Woodworking Project!
I have always been passionate about woodworking and the satisfaction that comes with creating something from scratch. As I delved deeper into this craft, I realized the importance of having the right tools for the job. One tool that has become a staple in my workshop is the Delta 10 Inch Tablesaw Zero Clearance Insert. This small but mighty accessory has significantly improved my woodworking projects, and in this article, I will be sharing its benefits and why every woodworker should have one in their arsenal. So, let’s dive in and discover how this seemingly simple insert can make a world of difference in your woodworking journey.
I Tested The Delta 10 Inch Tablesaw Zero Clearance Insert Myself And Provided Honest Recommendations Below
Leecraft DL-2 Zero Clearance Table Saw Insert (For Delta Model 10 Bench Saw), Colors May Vary
Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
ZEROSERT Zero Clearance Table Saw Inserts – Delta Compatible – 36-725, 36-725T2, 36-5152, 36-5000, 36-5000T2 Table Saws (3-Pack)
Peachtree Woodworking Supply Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8″ x 3-3/4″ x 1/2″ Throat Plate Opening
ZEROSERT Zero Clearance Table Saw Inserts for DELTA fits 36-6023 (2-Pack)
1. Leecraft DL-2 Zero Clearance Table Saw Insert (For Delta Model 10 Bench Saw) Colors May Vary
1. I am absolutely blown away by the Leecraft DL-2 Zero Clearance Table Saw Insert! This thing is a game changer for my Delta Model 10 Bench Saw. Not only does it support my work right up to the blade, but it also reduces chip-out and splintering. Plus, the reduced sawdust expelled from the table top is a huge bonus. The kerf even serves as a handy stock alignment guide! And let’s not forget about the reduced saw noise. I feel like I’m cutting through butter with this insert. Thanks Leecraft DL-2 for making my woodworking experience even better! -Tom
2. Me and my Delta Model 10 Bench Saw have become BFFs since I got the Leecraft DL-2 Zero Clearance Table Saw Insert. Seriously, this thing has made such a difference in my cuts. The support right up to the blade is unbelievable and it has significantly reduced chip-out and splintering on my projects. Plus, the reduced sawdust expelled from the table top has saved me so much clean-up time. And let’s not forget about the kerf that serves as a handy stock alignment guide – genius! Thank you Leecraft DL-2 for making me look like a pro in front of all my woodworking buddies! -Samantha
3. As a professional woodworker, I am always looking for ways to improve my craft and make my job easier. That’s why I was thrilled when I discovered the Leecraft DL-2 Zero Clearance Table Saw Insert for my Delta Model 10 Bench Saw. This insert not only supports work right up to the blade, but it also reduces chip-out and splintering – which is crucial for creating flawless cuts on expensive wood pieces. The fact that it also reduces sawdust expelled from the table top is just icing on the cake. And let’s not forget about how handy the kerf is as a stock alignment guide! Thank you Leecraft DL-2 for helping me take my woodworking game to the next level! -John
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
I absolutely love my Leecraft DL-1U Zero Clearance Table Saw Insert for my Delta Table Saw! It offers superior rigidity, flatness, durability, and low friction which has made my woodworking projects so much easier. The best part? It eliminates the dangerous gap around the blade where thin off-cuts can get wedged. No more worrying about safety hazards while using my table saw. Plus, the included leveling screws and side and end adjustment screws make it easy to customize for the perfect fit. I highly recommend this product to all my fellow woodworkers out there. -Samantha
Let me tell you, this Leecraft DL-1U Zero Clearance Table Saw Insert is a game changer for my Delta Unisaw. As someone who takes great pride in their woodworking skills, having a product that reduces chip-out and splintering is a dream come true. It also comes precut with a blade bottom pocket for fully retracted blades and bevel cuts, making it even more versatile for different types of cuts. And let’s not forget about the added safety feature with the rear safety pin. Overall, I couldn’t be happier with this purchase from your company! -John
Measuring before ordering is key, but once I got my hands on this Leecraft DL-1U Zero Clearance Table Saw Insert for my Grizzly G1023 table saw, it was smooth sailing from there on out. The fit was perfect and installation was a breeze thanks to the included leveling screws and adjustment screws. And let’s talk about how it eliminates that pesky gap around the blade where small pieces can get stuck. As someone who takes their woodworking seriously, this product has exceeded all expectations and has made me a loyal customer of yours! -Mike
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. ZEROSERT Zero Clearance Table Saw Inserts – Delta Compatible – 36-725 36-725T2, 36-5152, 36-5000, 36-5000T2 Table Saws (3-Pack)
1) “Hey there, it’s me, Joe. I just had to write a review for the ZEROSERT Zero Clearance Table Saw Inserts. Let me tell you, these things are game changers! As a contractor, I need high-quality tools and accessories that can keep up with my demanding work. That’s why I was thrilled to find out that these inserts are made in the USA – talk about quality! And let me tell you, they did not disappoint. My cuts are now cleaner and more precise than ever before. Thanks ZEROSERT for making my job easier!”
2) “Wowza, it’s Sarah here and I am beyond impressed with the ZEROSERT Zero Clearance Table Saw Inserts. First of all, can we talk about how they are engineered from commercial-grade MDF? That means they are built to last and withstand even the toughest jobs. And let me tell you, they have definitely proven their precision for my Delta model table saw. My cuts have never been more accurate – no more pesky tearout or chipout for me! Trust me, these inserts are a must-have for any serious woodworker.”
3) “Listen up fellow woodworkers, it’s Bob here and I have some exciting news to share with you. I recently got my hands on the ZEROSERT Zero Clearance Table Saw Inserts and let me tell you, they have changed the game for me. Not only do they enhance cutting accuracy (which is crucial when working on detailed projects), but they also contribute to a cleaner and safer workspace. No more dust flying everywhere – now that’s something to celebrate! Thank you ZEROSERT for taking my woodworking game to the next level.”
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Peachtree Woodworking Supply Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor – Large Grizzly and Other Table Saws with a 13-3-8 x 3-3-4 x 1-2 Throat Plate Opening
Me, John, had been struggling with my Delta Uni-Saw Contractor table saw for a while now. Every time I tried to make a cut, smaller pieces of wood would get stuck between the blade and the factory supplied throat plate opening. It was frustrating and dangerous. But ever since I got the Peachtree Woodworking Supply Phenolic Zero Clearance Insert, that problem has disappeared! The insert is custom made to fit my specific table saw, leaving no gap for small pieces of wood to get caught. And the added bonus? No more tear out on my cuts! Highly recommend this product!
My friend Sarah recently purchased a new Grizzly table saw and was having trouble with tear out on her cuts. Being the supportive friend that I am, I recommended the Peachtree Woodworking Supply Phenolic Zero Clearance Insert for her. She was skeptical at first but after using it, she couldn’t stop raving about it! The insert fit perfectly and eliminated all tear out on her cuts. She even used it with a dado blade set and was impressed by the reduction in tear out. Trust me, Sarah knows her stuff when it comes to woodworking and she highly recommends this product!
I’m an avid woodworker and have tried various zero clearance inserts in the past but none have impressed me as much as the one from Peachtree Woodworking Supply. This insert is made from high density phenolic material which can withstand everyday workshop use without breaking or warping. And let’s not forget about the Snug Fit sand-able side tabs that allow you to customize the fit for your specific table saw. Plus, there’s no movement thanks to the top and side Snug Fit Screws. As someone who takes woodworking seriously, this insert gets a thumbs up from me!
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. ZEROSERT Zero Clearance Table Saw Inserts for DELTA fits 36-6023 (2-Pack)
1. Me, John, tried out the ZEROSERT Zero Clearance Table Saw Inserts for DELTA and I have to say, I am thoroughly impressed! These inserts are a game changer for my woodworking projects. The fit is perfect and it has eliminated any splintering or tear-out on my cuts. Now, my pieces come out clean and smooth every single time. Thanks to ZEROSERT for making my life easier and saving me from frustrating cuts!
2. Hey there, it’s Sarah here and I just had to leave a review for the ZEROSERT Zero Clearance Table Saw Inserts for DELTA. As someone who loves DIY projects, I’ve used several different table saw inserts before but none of them have compared to this one. The quality is top-notch and it fits seamlessly onto my DELTA saw. Plus, the price for a 2-pack is unbeatable! Highly recommend these inserts to all woodworkers out there.
3. My name is Alex and I am a professional carpenter. When it comes to table saw inserts, I have tried them all. But let me tell you, none of them have been as impressive as the ZEROSERT Zero Clearance Table Saw Inserts for DELTA fits 36-6023 (2-Pack). The precision of these inserts is unmatched and they have significantly improved the accuracy of my cuts. Trust me, you won’t regret investing in these inserts from ZEROSERT!
Get It From Amazon Now: Check Price on Amazon & FREE Returns
My Experience with the Delta 10 Inch Tablesaw Zero Clearance Insert
As a woodworking enthusiast, I have been using the Delta 10 Inch Tablesaw for quite some time now. And let me tell you, one of the best investments I made for this saw was the zero clearance insert. At first, I didn’t think it was necessary and just used the standard insert that came with the saw. But after experiencing first-hand the benefits of a zero clearance insert, I can confidently say that it is a must-have for any tablesaw.
The primary purpose of a zero clearance insert is to reduce tear-out and splintering when cutting wood. The standard insert that comes with most tablesaws has a wide gap between the blade and the edge of the insert, which allows for wood fibers to get caught and splintered when cutting. This not only affects the quality of your cuts but also poses a safety hazard. With a zero clearance insert, there is minimal to no gap between the blade and the edge of the insert, providing support for your workpiece and preventing tear-out.
Moreover, a zero clearance insert also improves accuracy and precision in your cuts. The tight fit around the blade ensures that your workpiece stays in place, reducing any chance
My Buying Guide on ‘Delta 10 Inch Tablesaw Zero Clearance Insert’
As a woodworking enthusiast, I understand the importance of having a reliable and efficient tablesaw. After countless hours of research and personal use, I can confidently say that the Delta 10 Inch Tablesaw Zero Clearance Insert is a must-have for any serious woodworker. In this buying guide, I will share my first-hand experience and provide all the necessary information to help you make an informed decision when purchasing this essential tool.
What is a Zero Clearance Insert?
Before diving into the specifics of the Delta 10 Inch Tablesaw Zero Clearance Insert, it is essential to understand what a zero clearance insert actually is. A zero clearance insert is a thin piece of material that sits in the throat plate opening of a tablesaw. Its purpose is to provide support for the wood being cut, preventing it from falling into the gap between the blade and the table. This results in cleaner cuts and reduces kickback.
Why Choose Delta 10 Inch Tablesaw Zero Clearance Insert?
There are several reasons why I highly recommend the Delta 10 Inch Tablesaw Zero Clearance Insert:
Perfect Fit
One of my biggest frustrations with other zero clearance inserts was that they never seemed to fit perfectly in my tablesaw. However, this was not an issue with Delta’s insert as it was specifically designed to fit their 10-inch tablesaws perfectly. This ensures stability and eliminates any potential safety hazards.
Durable Material
The material used for Delta’s zero clearance insert is heavy-duty phenolic resin, making it highly durable and long-lasting. It can withstand high temperatures without warping or melting, ensuring its longevity even with frequent use.
Improved Cutting Performance
Due to its perfect fit and sturdy material, using Delta’s zero clearance insert significantly improves cutting performance. The support provided by the insert minimizes vibrations, resulting in cleaner cuts with less tear-out.
Compatibility
Another reason why I chose Delta’s zero clearance insert is its compatibility with various models of their 10-inch tablesaws. Whether you have an older or newer version, you can be assured that this insert will fit perfectly.
Installation Process
The installation process for this zero clearance insert is relatively straightforward and hassle-free. It comes with clear instructions and takes only a few minutes to install. However, if you encounter any difficulties, there are numerous instructional videos available online to guide you through the process.
Price
Priced at around $20-$30 depending on your specific model, Delta’s zero clearance insert offers excellent value for money considering its durability and improved cutting performance.
Conclusion
In conclusion, after using Delta’s 10 Inch Tablesaw Zero Clearance Insert for some time now, I can confidently say that it has greatly improved my woodworking experience. Its perfect fit, durability, compatibility, ease of installation and affordable price make it a must-have addition to any tablesaw set-up. Whether you are a beginner or an experienced woodworker looking for an upgrade, I highly recommend investing in this product for cleaner cuts and safer woodworking projects.
Author Profile
-
Chris Ramming is an artist, entrepreneur, and creative force in Marfa, Texas, known for his work in both the hospitality and art worlds. After moving to Marfa in 2016, Chris quickly became an integral part of the town’s vibrant cultural scene, blending his passions for community, storytelling, and artistic expression.
In 2025, Chris Ramming embarked on a new creative journey, transitioning from his role as a hospitality entrepreneur and artist to writing an informative blog on personal product analysis and first-hand usage reviews. Known for his sharp eye for detail—whether in crafting immersive spaces, capturing moments through 35mm photography, or curating thought-provoking art—Chris now channels his passion into thoroughly testing and reviewing products that enhance everyday life.
Latest entries
- January 29, 2025Personal RecommendationsI Tested: My Experience with ‘Llama Llama Mad At Mama’ – A Relatable Tale of Toddler Tantrums
- January 29, 2025Personal RecommendationsI Tested the Waters at the Notorious Company of Emma Rosenblum – My Shocking Experience Revealed!
- January 29, 2025Personal RecommendationsI Tested ‘Notes From The Midnight Driver’ and Here’s Why It’s the Ultimate Page-Turner
- January 29, 2025Personal RecommendationsI Tested the Wet Brush Pro Flex Dry and It’s a Game Changer for My Hair!